LEDs are encapsulated in a silicon gel making them weather and damage resistant. The cable is attached to the LED and then surrounded with epoxy which securely holds the cable in place. The tough rubber cable stays flexible even on the coldest of days.

String Specification

Bulb Type:LED Smooth Cap
Bulb Wattage: 0.13 Watts
IP Rating: IP44
Plug Supplied: No
Voltage: 230V (Standard Household)
Cable Colour: Black
Connect-able: Yes
Dimm-able: No
Function(s):Static/Twinkling
Indoor or Outdoor: Yes, temporary outdoor use only

Installation Sheet PDF

How Many Lights Can I Connect From One Start Cable?

Very much a manufacturer's calculation but their table below shows that for most installations one starter cable will be sufficient. However we tend to split our displays over two or more starter cables for ease of installation and to make fault finding easier. We recommend dividing the installation into as many starter cables as is reasonably practical.

Dispatch Times

Orders received by noon will be sent out the same day. Orders received at all other times will be dispatched the next working day.

Delivery Information

Your goods will be sent using a tracked Parcelforce 24 service. Deliveries will be during standard working hours Monday to Friday. Your signature will be required. Your email address will be shared with Parcelforce for the tracking of your parcel. View Privacy Policy

Returns

Returns accepted for these products within 14 days after receipt of goods if they are have not been used and returned in the original packaging. View Returns Policy

How Many Sets Will I Need?

There is no definitive answer. As a general rule, the more lights you use the better the tree will look. You also have to consider where the tree is placed. Have a heavily density lit tree in certain areas may look too bright. When decorating a tree remember that if you put the lights deep into the middle of the tree you will achieve a good solid lighting effect as the lights will illuminate the tree itself.

Heavy Density - Allow 10 metres of string light for each 0.3 metre of decorated tree. Run lights up and down each branch. Most effective when only using lights for decoration.

Medium Density - Allow 10 metres of string light for each 0.5 metre of decorated tree. Run lights up and down major branches. Tree will look good but will benefit from other decoration, See our bauble and star listings.

Light Density - Allow 10 metres of string light for each 1 metre of decorated tree. Wrap the string lights around the branch tips in concentric circles. It you are solely relying on lights for all tree decoration this method will not be suitable.Your tree will look very sad. It is suitable for internally lit trees with lots of other decoration.

We secure the lights to exterior trees with 3.6mm wide cable ties between 160 and 200mm long. Black coloured ties can be used however natural/clear ties can be used and are easier to see when taking the lights off the tree. Other ties can be used however sandwich bag ties are not recommended as the metal strip can cut into the cable if the bag tie is twisted too tightly around the cable.

Medium Density

Heavy Density

How Many Lights Can I Connect From One Start Cable?

Very much a manufacturer's calculation but their table below shows that for most installations one starter cable will be sufficient. However we tend to split our displays over two or more starter cables for ease of installation and to make fault finding easier. We recommend dividing the installation into as many starter cables as is reasonably practical.